8.2.3.5 Packet Tracer - Troubleshooting EIGRP for IPv4.

CCNA3 8.2.3.5 Packet Tracer - Troubleshooting EIGRP for IPv4.

R1

R1>en

R1#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

R1(config)#no router eigrp 11

R1(config)#router eigrp 1

R1(config-router)#passive-interface gigabitEthernet 0/0

R1(config-router)#network 172.31.10.0 0.0.0.255

R1(config-router)#network 172.31.40.224 0.0.0.3

R1(config-router)#network 172.31.40.232 0.0.0.3

R1(config-router)#no auto-summary 

R1(config-router)#ex

R1(config)#

R2

R2>en

R2#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

R2(config)#router eigrp 1

R2(config-router)#network 172.31.40.228 0.0.0.3

R2(config-router)#ex

R3

R3>en

R3#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

R3(config)#router eigrp 1

R3(config-router)#no auto-summary 

R3(config-router)#ex

8.1.2.5 Packet Tracer - Configuring EIGRP Manual Summary Routes for IPv4 and IPv6.

CCNA3 8.1.2.5 Packet Tracer - Configuring EIGRP Manual Summary Routes for IPv4 and IPv6.

Router Branch-1

Branch-1(config)#int s0/0/0
Branch-1(config-if)#ip sum
Branch-1(config-if)#ip summary-address ei
Branch-1(config-if)#ip summary-address eigrp 1 172.31.8.0 255.255.252.0


Router Branch-2
Branch-2>en
Branch-2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Branch-2(config)#int se0/0/1
Branch-2(config-if)#ip su
Branch-2(config-if)#ip summary-address ei
Branch-2(config-if)#ip summary-address eigrp 1 172.31.12.0 255.255.252.0


Router Ipv4-Edge
IPv4-Edge>en
IPv4-Edge#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
IPv4-Edge(config)#int se0/1/0
IPv4-Edge(config-if)#ip su
IPv4-Edge(config-if)#ip summary-address ei
IPv4-Edge(config-if)#ip summary-address eigrp 1 172.31.8.0 255.255.248.0