Tuesday, September 6, 2016

8.1.2.5 Packet Tracer - Configuring EIGRP Manual Summary Routes for IPv4 and IPv6.



CCNA3 8.1.2.5 Packet Tracer - Configuring EIGRP Manual Summary Routes for IPv4 and IPv6.
Router Branch-1
Branch-1(config)#int s0/0/0
Branch-1(config-if)#ip sum
Branch-1(config-if)#ip summary-address ei
Branch-1(config-if)#ip summary-address eigrp 1 172.31.8.0 255.255.252.0


Router Branch-2

Branch-2>en
Branch-2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Branch-2(config)#int se0/0/1
Branch-2(config-if)#ip su
Branch-2(config-if)#ip summary-address ei
Branch-2(config-if)#ip summary-address eigrp 1 172.31.12.0 255.255.252.0


Router Ipv4-Edge
IPv4-Edge>en
IPv4-Edge#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
IPv4-Edge(config)#int se0/1/0
IPv4-Edge(config-if)#ip su
IPv4-Edge(config-if)#ip summary-address ei
IPv4-Edge(config-if)#ip summary-address eigrp 1 172.31.8.0 255.255.248.0

8 comments:

  1. How about configure summary route on Branch-3 IPv6

    ReplyDelete
    Replies
    1. Branch-3#en
      Branch-3#conf t
      Branch-3(config)#ipv6 router eigrp 1
      Branch-3(config-rtr)#eigrp router-id 3.3.3.3
      Branch-3(config-rtr)#no shutdown
      Branch-3(config)#int s0/0/0
      Branch-3(config-if)# ipv6 summary-address eigrp 1 2001:DB8:1:8::/62
      ... Do the same thing in branch 4 and ipv6-edge


      Delete
  2. Nice and good article. It is very useful for me to learn and understand easily. Thanks for sharing your valuable information and time. Please keep updating Hadoop Admin Online Training

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. thank you so much..i watched utube that duration 30 min and above really wasting my time....but with yr helped it only took me 5 min to complete the lab task thanks

    ReplyDelete